Landlords responsibilities

landlords electrical responsibilities in bristol

The electrical safety responsibilities of Bristols landlords

Most accidents involving electricity in the home or work place arise through faults in, or misuse of, domestic appliances or the electrical installation. The most common electrical hazards are electric shock, fire and burns.

These are often caused by:

  • The electrical installation/equipment deteriorating over time
  • Damaged switches, sockets and electrical equipment
  • Misuse of the installation and equipment
  • Poor/lack of maintenance
  • Vandalism

If you're a landlord, you are required by law to ensure your property meets several electrical safety standards. With this handy guide, we'll ensure you stay on the right side of that law!

By law you are required to ensure:

That the electrical installation in your property is safe at the start of the tenancy

At the start of a tenancy it is your responsibility to ensure the electrics in your property are in a safe condition. To do this you should ideally get an electrician to carry out a basic safety visual safety check. This basic safety check will ensure there are no hazards such as broken sockets and light switches, no signs of scorching due to overloading and no damaged cables.

The new landlords act requires all rented properties are to have the electrical installation inspected at regular intervals, all properties must have a valid condition report by April 2021.

If you own a House in Multiple Occupation (HMO) you are legally obliged to have a full electrical inspection carried out on your property every five years. As part of this inspection – called a periodic inspection or an EICR (Electrical Installation Condition Report), you should also conduct a portable appliance test (PAT).

That the electrical installation and appliances are maintained and in a safe condition throughout the tenancy

Over time the electrical installation and appliances can deteriorate and become damaged for a number of different reasons. We suggest that you periodically check these or have an electrician check them on your behalf. You should:

  • Check there are no cuts or abrasions in cable coverings
  • Check the cable coverings of plugs are gripped by the cord grip in the plug top and that no coloured cables are visible
  • Check plugs aren't damaged – e.g. no cracks to the case or bent pins
  • Check there are no signs of overheating or burning on plugs and sockets
  • Check that appliances aren't damaged

That any appliances you provide in the property have the CE marking and are safe

It is your responsibility to ensure the appliances you provide are safe and meet European safety law requirements. To ensure this, make sure you only purchasing appliances that are marked with the CE logo.

To ensure your appliances are safe as part of the periodic inspection, your electrician should also conduct a PAT on any portable electrical appliances that you have provided with the property. By conducting this test your electrician will confirm that these appliances are safe and in working in order. To confirm this sticker will be added to the plug of each device to show the date it was tested.

If you're still in doubt, contact a qualified electrician for advice.

Contact Anton on 0117 321 6406




Burridge Electrical | Terms & Conditions


safe working electrician bristol uk

Contact us:


Burridge Electrical

89 Dundridge Lane | St George | Bristol | Avon | BS5 8SN

burridgeec@outlook.com

Tel: 0117 321 6406

Mob: 07584297054


Social Media:


Or use the form:


We cover:The south west | Bristol | Hanham | Longwell Green | Wilsbridge | Keynsham | Bath | Warmley | Oldland | Kingswood | Fishponds | Staple Hill | St.George | Knowle | Hartcliffe | Withywood | Ashton | Patchway | Filton | Bedminster | St.Pauls | and all surrounding areas.

©2017 - 2021 Burridge Electrical - Anton Burridge - Electricians in Bristol